Solaris 10 Commad Line Guide – Configure Tape and Storage

cfgadm -c configure c3
cfgadm -o show_FCP_dev -al
cfgadm -o show_SCSI_LUN -al

cfgadm -o unusable_FCP_dev -c unconfigure c3::500104f0008aa432
cfgadm -c unconfigure c3::500104f0008aa531
cfgadm -alo show_FCP_dev

luxadm -e port            >>To show link status of card
luxadm -e forcelip
luxadm -e forcelip /dev/cfg/c3
luxadm -e dump_map /dev/cfg/c3
devfsadm -C

# luxadm probe
# prtconf -vp | grep wwn
# prtconf -vp | more
# luxadm -e port
# luxadm fcode_download -p    >>show all vendor HBA’s
# luxadm qlgc            >>show Sun/Qlogic HBA’s

cfgadm -c unconfigure
cfgadm -al -o show_FCP_dev
devfsadm -C

/usr/openv/volmgr/bin/tpautoconf -report_disc

# luxadm probe
# luxadm display controller_number
# luxadm display enclosure_name
# luxadm display logical_path
# luxadm display enclosure_name, disk_location
# luxadm fcode_download -p

2 responses to “Solaris 10 Commad Line Guide – Configure Tape and Storage

Leave a Reply to chetan Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.