Hi, sorry if this post is not easy to read, I just copy-paste from my notes:-). Enjoy it..
The Sun SPARC® Enterprise M-series server line is the newest addition to Sun Microsystem’s mid-range (M4000/M5000) and high-end server (M8000/M9000) families. Designed for the enterprise- class datacenter, all members of the server line offer a great deal of configuration flexibility in addition to high performance and reliability.
#########################################################################
#. >>switch the prompt from domain console to XSCF console
XSCF>console -d 0 >>swith from XSCF console to domain console
XSCF>console -d 0 -f >>swith from XSCF console to domain console with force option
XSCF>reset -d 0 xir >>reset/restart domain 0 console
XSCF>poweroff -d 0 >>power off domain ID 0
XSCF>poweroff -f -d 0 >>forcibly power off domain ID 0
XSCF>poweroff -a >>power off all domain together
XSCF>poweron -a >>power on all domain
XSCF>poweron -d 0 >>power on domain ID 0
XSCF>version -c xcp >>to determine firmware version
XSCF>switchscf -t Standby
XSCF>snapshot -d usb0 >>save/collect log to USB flash disk
XSCF>showlogs power
XSCF> setdomainmode -d 0 -m autoboot=on
XSCF> showdomainmode -d 0
Host-ID : 85289956
Diagnostic Level : min
Secure Mode : on
Autoboot : on
CPU Mode : auto
——————————————————————————–
TROUBLESHOOTING COMMAND:
-showhardconf >>displays information about each FRU
-showlogs
-showstatus >>Displays the information concerning the units failed or degraded
-fmdump >>to display the contents of any log files associated with the Solaris fault manager
-fmadm faulty
——————————————————————————–
Command used for ADDING & REMOVING DOMAIN:
setdcl
setupfru
addboard
deleteboard
moveboard
———————————————————————————–
XSCF> set setaltitude setdualpowerfeed setntp setsnmp setapcs setemailreport setpasswordpolicy setsnmpusm setarchiving sethostname setpowerupdelay setsnmpvacm setaudit sethttps setprefetchmode setssh setautologout setldap setprivileges setsunmc setcod setlocale setrci settelnet setdate setlocator setrcic settimezone setdcl setloginlockout setroute setupfru setdomainmode setlookup setservicetag setupplatform setdomparam setnameserver setshutdowndelay setdscp setnetwork setsmtp XSCF> set setaltitude setdualpowerfeed setntp setsnmp setapcs setemailreport setpasswordpolicy setsnmpusm setarchiving sethostname setpowerupdelay setsnmpvacm setaudit sethttps setprefetchmode setssh setautologout setldap setprivileges setsunmc setcod setlocale setrci settelnet setdate setlocator setrcic settimezone setdcl setloginlockout setroute setupfru setdomainmode setlookup setservicetag setupplatform setdomparam setnameserver setshutdowndelay setdscp setnetwork setsmtp XSCF> Display all 145 possibilities? (y or n) addboard setdate showdomainmode addcodlicense setdcl showdomainstatus addfru setdomainmode showdscp adduser setdomparam showdualpowerfeed applynetwork setdscp showemailreport cfgdevice setdualpowerfeed showenvironment clockboard setemailreport showfru confdidr sethostname showhardconf console sethttps showhostname deleteboard setldap showhttps deletecodlicense setlocale showldap deletefru setlocator showlocale deleteuser setloginlockout showlocator disablemodes setlookup showloginlockout disableuser setnameserver showlogs dumpconfig setnetwork showlookup enableescalation setntp showmodes enableservice setpasswordpolicy showmonitorlog enableuser setpowerupdelay shownameserver escalation setprefetchmode shownetwork exit setprivileges shownotice flashupdate setrci showntp fmadm setrcic showpasswordpolicy fmdump setroute showpowerupdelay fmstat setservicetag showprefetchmode getflashimage setshutdowndelay showresult ioxadm setsmtp showroute man setsnmp showservicetag moveboard setsnmpusm showshutdowndelay nslookup setsnmpvacm showsmtp password setssh showsnmp ping setsunmc showsnmpusm poweroff settelnet showsnmpvacm poweron settimezone showssh prtfru setupfru showstatus rebootxscf setupplatform showsunmc replacefru showaltitude showtelnet reset showapcs showtimezone resetdateoffset showarchiving showuser restoreconfig showaudit snapshot restoredefaults showautologout switchscf sendbreak showboards testsb service showcod traceroute setaltitude showcodlicense unlockmaintenance setapcs showcodusage version setarchiving showconsolepath viewaudit setaudit showdate who setautologout showdcl setcod showdevices -----------------------------------------------------------------------------------
OTHER COMMAND:
adduser
applynetwork >reset XSCF to reflect information that has been set for the XSCF network
console
exit
cfgdevice >connect the CD-RW/DVD-RW drive unit and the tape drive unit to the port, disconnect it from the port, or display the status of the drive
XSCF> cfgdevice -l
XSCF> cfgdevice -c attach -p 0-0
XSCF> cfgdevice -f -c detach -p 0-0 >Disconnects the DVD drive/tape drive unit from the port 0-0.
XSCF> cfgdevice -y -c attach -p 0-0 >Connects the DVD drive/tape drive unit to port 0-0 when the system is being powered on. Automatically answers “y” to all prompts.
XSCF> cfgdevice -q -y -c attach -p 0-0 >answer ‘y’ to all prompts without displaying message
deleteuser
dumpconfig/restoreconfig >>save/restore XSCF configuration
XSCF> dumpconfig file:///media/usb_msd/backup-file.txt
XSCF> dumpconfig ftp://server/backup/backup-sca-ff2-16.txt
XSCF> restoreconfig file:///media/usb_msd/backup-file.txt
fmadm
fmadm faulty >>
fmdump >view fault management logs
Exp.
XSCF> fmdump
Sep 29 15:09:25.4335 8cec9a83-e2a3-4dc3-a7cd-de01caef5c63 FMD-8000-4M
Sep 29 15:10:09.6151 5f88d7d5-a107-4435-99c9-7c59479d22ed FMD-8000-58
[Display Very Verbose Event Detail for the Last UUID:
XSCF> fmdump -e -V -u 5f88d7d5-a107-4435-99c9-7c5947 9d22ed
XSCF> fmdump -m -M >>Displaying Contents of the Fault Manager syslog Message
flashupdate >update firmware
getflashimage >download a firmware image file
XSCF> getflashimage http://imageserver/images/FFXCP1041.tar.gz
XSCF> getflashimage ftp://imageserver/images/FFXCP1041.tar.gz
moveboard >move XSB from current domain to another
poweron
poweroff
prtfru
XSCF> prtfru -c system-board
rebootxscf >reset the XSCF
replacefru >
reset >reset the specific domain; use this command only for the purpose of recovery, such as if OS hang
senddbreak >send a break signal to the specified domain
XSCF> sendbreak -d 0
setautologout
setdate
setdate -u -s 012707592006.00 >>Sets “January 27 07:59:00 2006” of UTC as the current time
setdomainmode
sethostname
sethttps
setnetwork
setntp
setroute
settelnet
setssh
XSCF> setssh -c enable
setprivileges
XSCF> setprivileges aziz filedeng
showconsolepath
showdate
showdevice
showdevice -d 0
showboards >check the XSB number, domain ID, LSB number, XSB status
XSCF>showboards -a
showdcl >check domain ID, LSB number, configuration policy
XSCF>showdcl -va
showdomainmode
showdomainstatus -a >check the power status of the system
showenvironment >display the intake air temperature and humidity, temperature sensor information, voltage sensor
showfru >display the hardware settings of specified device
showhardconf >display information about field replaceable unit (FRU)
showlogs >display the specific log
XSCF>showlogs event
XSCF>showlogs error -v
XSCF>showlogs power
XSCF>showlogs monitor
XSCF>showlogs console
showstatus
showmonitorlog >display the contents of monitoring messages in real time
shownetwork -a >display information of network interfaces for XSCF
showuser
snapshot >collect and transfer environtment, log, error, and FRUID data
switchscf >switch the XSCF unit between the active and standby states
testsb >perform an initial diagnosis of the specified physical system board (PSB
————————————————————————————–
REPLACE INTERNAL TAPE:
1. unconfigure tape drive from OS
# cfgadm -a
c0::rmt/0 tape connected configured unknown
# cfgadm -c unconfigure c0::rmt/0
Stop the connection to the CD-RW/DVD-RW drive unit on the same controller
as the target tape drive unit
#cfgadm -a
c0::dsk/c0t4d0 CD-ROM connected configured unknown
#cfgadm -c unconfigure c0::dsk/c0t4d0
# cfgadm -a
c0::dsk/c0t4d0 CD-ROM connected unconfigured unknown
c0::rmt/0 tape connected unconfigured unknown
2. Detach the target tape drive unit from the port
XSVF> cfgdevice -c detach -p <port no.> command
3. Confirm that the target tape drive unit is unconfigured from the domain.
cfgdevice -l
4. Remove the tape drive unit
5. Mount the replacement tape drive unit
6. Attach the tape drive unit to the port
XSCF> cfgdevice -c attach -p <port no.>
7. Confirm that the target tape drive unit is configured from the domain.
XSCF> cfgdevice -l
8. from OS, execute command ‘cfgadm -c configure TAPE_Ap_Id’ to configure tape drive
#cfgadm -c configure c0::rmt/0
9. from OS< execute command ‘cfgadm -c configure DVD_Ap_Id’ to configure DVD drive
#cfgadm -c configure c0::dsk/c0t4d0
10. execute ‘cfgadm -al’ to verify the status of tape drive and DVD drive
————————————————————————–
NOTE:
PSB (Physical System Board)
XSB (Extended System Board)
A PSB that is logically divided into one part (no division) is called a Uni-XSB, and a PSB that is logically divided into four parts is called a Quad-XSB. On Quad-XSB configuration; ONE XSB CONTAIN TWO PCI SLOT
——————————————————————————–
UPDATE:
Oracle SPARC M-Series Servers Documentation:
(http://www.oracle.com/technetwork/documentation/sparc-mseries-servers-252709.html)
E19867-01 View Library Download Sun SPARC Enterprise M3000 Server Documentation
E19855-01 View Library Download Sun SPARC Enterprise M4000 Server Documentation
E19580-01 View Library Download Sun SPARC Enterprise M5000 Server Documentation
E19170-01 View Library Download Sun SPARC Enterprise M8000 Server Documentation
E19415-01 View Library Download Sun SPARC Enterprise M9000 Server Documentation
SAIFUL AZIZ's BLOG 
Yo, thanks Aziz, v. useful. Just had 4 x M3000 16GB servers delivered that I have to rack out, install, set up single user logins through AD, file share to Win 2008 R2, system logging to a Windows event logging tool etc., etc.
Hi
Your notes is very useful and it makes my work very easy. hats of to you.
Hi Aziz,
your command and help is very helpful in this blog,
how ever do you have step by step prcedure to configure domain in uni-XSB and Quad XSB mode.
if you send me or publish that in you blog then it will be very helpful to me and others.
Regards
Avinash
Hi Avinash,
The detail procedure are here:
http://download.oracle.com/docs/cd/E19867-01/E21618-01/Domains.html
IF you understand the concept, then it would be easy ^^
Hi! i have the instructions for configure a domain in Quad XSB mode and it´s something like this:
In this case a have an Sun SE M5000 with 8 CPUs SPARC 64 VII+, and i have to create 2 domains, the first will have 6 CPUs and the second with only 2 CPUs, the Sun SE M5000 comes with 2 IO Units and each one Domain will take one of them.
This are the instructions:
Set the two SB on Quad-XSB mode
XSCF> setupfru -x 4 sb 0
XSCF> setupfru -x 4 sb 1
Create the LD for Domain 0
XSCF> setdcl -d 0 -a 0=00-0
XSCF> setdcl -d 0 -a 1=00-1
XSCF> setdcl -d 0 -a 2=00-2
XSCF> setdcl -d 0 -a 3=00-3
XSCF> setdcl -d 0 -a 4=01-02
XSCF> setdcl -d 0 -a 5=01-03
Note: We assigned 01-02 and 01-03 instead of 01-00 and 01-01 because the 01-00 CPU take´s the control of the Second IO Unit, remember that in the Sun SE M5000 only the 00-0 and 01-00 CPUs Can take´s control of both IO Units
Create the LD for Domain 1
XSCF> setdcl -d 1 -a 0=01-00
XSCF> setdcl -d 1 -a 1=01-01
Assign the LD to the domain 0
XSCF> addboard -c assign -d 0 00-0 00-1 00-2 00-3 01-02 01-03
Assign the LD to the domain 1
XSCF> addboard -c assign -d 1 01-00 01-01
Review the resources assigned to the domains
XSCF> showdcl -v -d 0
XSCF> showdcl -v -d 1
Power On both Domains
XSCF> poweron -d 0
XSCF> poweron -d 1
Connec to the console of the first domain
XSCF>console -d 0
Connec to the console of the first domain
XSCF>console -d 1
Once Solaris have booted, just check the resources of each domain with:
root# prtdiag -v
Regards
AVA
Hi, i configure somain similar to this ,
Set the two SB on Quad-XSB mode
XSCF> setupfru -x 4 sb 0
XSCF> setupfru -x 4 sb 1
Create the LD for Domain 0
XSCF> setdcl -d 0 -a 0=00-0
XSCF> setdcl -d 0 -a 1=00-1
XSCF> setdcl -d 0 -a 2=00-2
XSCF> setdcl -d 0 -a 3=00-3
XSCF> setdcl -d 1 -a 1=01-0
XSCF> setdcl -d 1 -a 2=01-1
XSCF> setdcl -d 1 -a 3=01-2
XSCF> setdcl -d 1 -a 3=01-3
addboard -c assign -d 0 00-00 00-01 00-02 00-03
addboard -c assign -d 1 01-00 01-01 01-02 01-03
it only assigns 00-00 to d0 and 01-00 to domain 1 rest of the resources throws the error not install in addboard command and showboard and dcl command shows (sp) unassigned and unmounted.status.
could please let me know what wrong i am doing which assigning modules to domain.
Regards
Avinash
Thanks to both,
Hi,
I configure somain similar to this ,
Set the two SB on Quad-XSB mode
XSCF> setupfru -x 4 sb 0
XSCF> setupfru -x 4 sb 1
Create the LD for Domain 0
XSCF> setdcl -d 0 -a 0=00-00
XSCF> setdcl -d 0 -a 1=00-01
XSCF> setdcl -d 0 -a 2=00-02
XSCF> setdcl -d 0 -a 3=00-03
Create the LD for Domain 1
XSCF> setdcl -d 1 -a 1=01-00
XSCF> setdcl -d 1 -a 2=01-01
XSCF> setdcl -d 1 -a 3=01-02
XSCF> setdcl -d 1 -a 3=01-03
addboard -c assign -d 0 00-00 00-01 00-02 00-03
addboard -c assign -d 1 01-00 01-01 01-02 01-03
However it only assigns 00-00 to d0 and 01-00 to domain d1 rest of the resources throws the error” not install” in addboard assign command and showboard and dcl command shows (sp) unassigned and unmounted.status.
can you please help me on this and let me know what wrong i am doing while configuring the domains
Please ignore earlier post, I posted it accidently
Regards
Avinash
Please ignore earlier comment,
Set the two SB on Quad-XSB mode
XSCF> setupfru -x 4 sb 0
XSCF> setupfru -x 4 sb 1
Create the LD for Domain 0
XSCF> setdcl -d 0 -a 0=00-00
XSCF> setdcl -d 0 -a 1=00-01
XSCF> setdcl -d 0 -a 2=00-02
XSCF> setdcl -d 0 -a 3=00-03
Create the LD for Domain 1
XSCF> setdcl -d 1 -a 1=01-00
XSCF> setdcl -d 1 -a 2=01-01
XSCF> setdcl -d 1 -a 3=01-02
XSCF> setdcl -d 1 -a 3=01-03
addboard -c assign -d 0 00-00 00-01 00-02 00-03
addboard -c assign -d 1 01-00 01-01 01-02 01-03
However it only assigns 00-00 to d0 and 01-00 to domain d1 rest of the resources throws the error” not install” in addboard assign command and showboard and dcl command shows (sp) unassigned and unmounted.status.
can you please help me on this and let me know what wrong i am doing while configuring the domains
Please ignore earlier post, I posted it accidently
Regards
Avinash
again one more typo mistake
Create the LD for Domain 1
XSCF> setdcl -d 1 -a 0=01-00
XSCF> setdcl -d 1 -a 1=01-01
XSCF> setdcl -d 1 -a 2=01-02
XSCF> setdcl -d 1 -a 3=01-03
Could you check from your side and please let me know if i am doing something wromg in this,
showboards shows 00-00 and 01-00 assigned and remainings resorces are showing unmount and unassigned with SP
status.
Set the two SB on Quad-XSB mode
XSCF> setupfru -x 4 sb 0
XSCF> setupfru -x 4 sb 1
Create the LD for Domain 0
XSCF> setdcl -d 0 -a 0=00-00
XSCF> setdcl -d 0 -a 1=00-01
XSCF> setdcl -d 0 -a 2=00-02
XSCF> setdcl -d 0 -a 3=00-03
Create the LD for Domain 1
XSCF> setdcl -d 1 -a 0=01-00
XSCF> setdcl -d 1 -a 1=01-01
XSCF> setdcl -d 1 -a 2=01-02
XSCF> setdcl -d 1 -a 3=01-03
addboard -c assign -d 0 00-00 00-01 00-02 00-03
addboard -c assign -d 1 01-00 01-01 01-02 01-03
However it only assigns 00-00 to d0 and 01-00 to domain d1 rest of the resources throws the error” not install” in addboard assign command and showboard and dcl command shows (sp) unassigned and unmounted.status.
can you please help me on this and let me know what wrong i am doing while configuring the domains
Please ignore earlier post, I posted it accidently
Regards
Avinash
hai,
could you please give me the steps to reboot my m4000 server… we have two domains in this 1- reporting server 2- application server.. how to reboot only my reporting server?
I Always use the poweroff and poweron command, if you know Which doman it´s the reporting server… if where the domain 0 you could use the next commands
First:
XSCF> poweroff -d 0
later Review the domain status
XSCF> showdcl -v -d 0
And later power on again
XSCF> poweron -d 0
Knelgodwe wants to be free, just like these articles!
mas Azis sedikit tanya dunk. untuk penggunaan alom di mesin type T3 gimana ya, saya ada kesulitan dalam mereset Alom nya, khususnya untuk menghilangkan lampu amber…
terima kasih
Halo Audi, untuk seri T-Series, kurang lebih commandnya seperti ini:
-> set /SYS/ clear_fault_action=true
contoh:
-> set /SYS/MB/CMP0/BR0/CH0/D0 clear_fault_action=True
Hi,
we have to replace a XsCF on a M5000. how to restore all the domain and the other setting after replacing the XSCF
You will no lose the configuration, you just need to Reset the clock after XSCF installation.
My business partners were looking for IRS 4506T-EZ some time ago and found a web service that has lots of fillable forms . If you are requiring IRS 4506T-EZ too , here’s a link “http://goo.gl/IdjS9d“.
Can anyone tell me how to set the m5000 hardware configuration back to default where all the hardware is configured under domain 0? I received a used m5000 and I see by running the command showdcl -a that domain 01 is configured and I don’t want this.
Thanks!
Jeff
XSCF> showdcl -a
DID LSB XSB Status
00 Running
00 00-0
01 01-0
—————————
01 Powered Off
00 01-0
how to replace the pci card ethernet in M3000